DCGT 32.52-SF3:H07 TURNING INSERT - POSITIVE
DCGT 32.52-SF3:H07 TURNING INSERT - POSITIVE
PRA7168567
7168567
9.43
/ EA
http://schema.org/OutOfStock
/Product/PRA7168567
- Chipbreaker: SF3
- Corner Radius: 0.8mm
- Hole Diameter: 0.177in
- Included Angle: 55°
- Inscribed Circle: 3/8in
- Insert Size: 32.52
- Insert Style: DCGT
- ISO Code: DCGT 11T308E-SF3 H07
- Material: Carbide
- Maximum Depth of Cut: 2.5mm
- Rake: Positive
- Relief Angle: 7°
- Seat Size: 11
- Shape: Diamond
- Surface Treatment: Uncoated
- Thickness: 5/32in
- Type: 0.457in
- Manufacturer Grade: H07
- ANSI Code: DCGT 32.52-SF3 H07
- Has Attributes: Yes
- Has Image: Yes
Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 9.525mm, 3.97mm thick, 0.8mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker SF3 with rounded cutting edges, in grade H07, an uncoated WC-Co carbide within ISO range S01-S20, for fine to medium machining of super-alloys
- Application
- Item Features
- Standards
Finishing Applications
- H07 grade special uncoated material for turning titanium and its alloys
- Fine grain substrate with low cobalt content
- High abrasion resistance
- Resistance to pitting on the cutting face when machining titanium and its alloys
- Resistance to plastic deformation
- Also suitable for the machining of non-ferrous metals and cast iron
- H type fine grain material (without cubic carbides) with low cobalt bonding phase content
- Special grade for machining titanium alloys
- Small to medium cross sections of chip
- Suitable for continuous to slightly interrupted cut
PROP65: This product contains chemicals known to the State of California to cause cancer. For more information: www.P65Warnings.ca.gov