516-417-26 28PC ASME 00 GAGE BLOCK SET

Calibration and Inspection Applications

(9) 0.0201 to 0.0209 in, (9) 0.021 to 0.029 in, (9) 0.01 to 0.09 in and 0.02005 in Blocks

• Precision gauge blocks are the primary standards vital to dimensional quality control in the manufacture of parts
• Provided with inspection certificate
• These higher accuracy gauges are intended for use within a controlled environment by skilled inspection staff
• Mainly used as reference standards for setting high-precision measuring equipment and for the calibration of lower grade gauge blocks
• Perfect wringing is possible using the center hole - after wringing the square gauge blocks, an optional tie rod can be inserted through the center hole to fix the blocks using a screw
• A height reference standard can easily be made - a precision height reference standard can be made easily and inexpensively using accessories such as the plain jaw and block base
• A dedicated inspection jig can be easily made - a dedicated inspection jig for periodic inspection of instruments can be made easily and inexpensively
• A wide measuring surface with cross section dimensions of [24.1 x 24.1 mm/0.95 x 0.95 in] is available
• A square gauge block can retain stable orientation both longitudinally and laterally
• A wide range of application measurements can be made, including cutting tool positioning, angle measurement with a sine bar, taper measurement with a roller and inspection of depth micrometers

ASME B89.1.9-2002