/harvey%20tool%20logo_150x150_72dpi_new.jpg)
.040" DIA 4FL CARBIDE BACK DEBURRING END MILL
HATL846340-C3
MFG #: 846340-C3
$73.20
/ EA
- Chamfer Width: 0.0048 in
- Country of Origin: US
- Cutter Head Diameter: 0.04 in
- Cutting Direction: Right Hand
- End Style: Chamfer Threaded
- Flat Width: 0.0300 in
- Manufacturer Name: Harvey Tool
- Material: Solid Carbide
- Overall Length: 2 in, 2in
- Shank Diameter: 0.125in, 1/8 in, 1/8in
- Shank Type: Cylindrical
- Head Diameter: 0.04in
- Length of Cut: 0.0048in
- Included Angle: 90, 90 deg, 90°
- Number of Flutes: 4
- Angle Per Side: 45, 45°
- Attributes (Y): Y
- Chamfer Center Diameter: 0.0362in
- Chamfer Center Length: 0.0324in
- End Length: 0.0300in, 0.03in
- Image (Y): Y
- Neck Diameter: 0.028in
- Neck Length: 0.125in, 1/8in
- Surface Treatment: AlTiN, C3
- System of Measurement: Imperial
- Application
- Item Features
- Standards
Deburring on backside of small holes and tight pockets
- Slightly undersized to fit in common hole sizes
- Design has smaller radial projection than double angle shank cutters and back chamfer cutters, which results in increased neck diameter and improved strength
- Left hand shear flute / right hand cut evacuates chip away from part
- Applicable Materials are Non-Ferrous Metal, Cast Iron, Steel, Stainless Steel, Composites
- Axial Length Of Cut 0.0048 in
- Neck Diameter 0.0280 in (0.7 mm)
- Neck Length 0.1250 in (1/8)
- Chamfer Center Diameter 0.0362 in
PROP65: This product contains chemicals known to the State of California to cause cancer