1" Boss Clamp Bolt-MB6200, Nut-MN6
DIXBU14
MFG #: BU14
$19.60
/ EA
- Bolt Size: 9/16" Hex
- Inside Diameter: 1"
- Outside Diameter: 1-34/64 to 1-46/64"
- Series: Boss™
- Torque Rating: 21 ft/lb
- Width: 3-1/8"
- Length: 2-7/8"
- Band Material: Iron
- Attributes (Y): Y
- Domestic or Import: Domestic
- Image (Y): Y
- Surface Treatment: Zinc Plated
- Item Features
- Recommended for steam service up to 450 deg F
- Bolts in boss clamps are designed to bend as they are tightened and this allows the clamps to conform to the hose outside diameter
- Always tighten bolts to their specified torque values
- Periodic re-tightening of bolts is required due to "cold flow" phenomenon present in all rubber hoses
- Boss clamps are for single use only, once removed they are to be discarded
- Warning: this products contains a chemicals known to the State of California to caused birth defects or other reproductive harm
- Do not use in connections with drinking water
- Wash hands after handling
- Replacement nuts and bolts are available
- Two gripping fingers and two clamps sections
- The bolts used in the boss interlocking clamps are not standard bolts
- They vary from standard bolts in their lengths, diameter, overall thread lengths and materials hardness
- These bolts can be retorqued, but it is not recommended to reuse the bolts or clamps, as they are designed for a single bend only
- Torque values for clamps are based on dry bolts
- The use of lubricant on bolts will adversely effect clamps performance
- Do not lubricate nuts and bolts