5x7/8 Hole CRS Surface Conditioning FE

Our standard Abrasives™ surface conditioning FE disc combines high edge durability and flexibility with high initial and extended cut rate for edge work, deburring and blending of all metal types on both flat and contoured surfaces. Standard Abrasives™ surface conditioning discs provide a more compact structure of non-woven fibers than Buff and Blend products. The FE disc has a woven fabric (scrim) embedded in the nylon structure to provide additional strength and durability. This helps extend the life of the disc and allows for extended use on ferrous materials or steel. This is the best material to use when high contact pressure and stock removal are required. Standard Abrasives™ surface conditioning FE discs are made of a tough, but flexible nylon mesh that fits any contoured surface. This mesh is also laced with aluminum oxide abrasive. Aluminum oxide discs are a good match for operators who desire all purpose versatility and economy. The mineral cuts fast while blending and deburring and should be used for applications on ferrous metals and composites. Aluminum oxide discs feature a premium grain with higher fracture strength, meaning the mineral will fragment and renew more readily. They are available in grades ranging from very fine to extra coarse. For the best results, it is recommended that a Standard Abrasives brand holder pad is used. Tests have shown that surface conditioning discs, when used in conjunction with the Standard Abrasives holder pad, have a greater durability and performance rate. These pads also assure that pressure is applied evenly all the way to the edge of the disc.