516-222-26 36PC 0 GR INCH SQ GAGE BLOCK SET

Inspection and Workshop Applications

(10) 0.1 to 0.1009 in, (9) 0.101 to 0.109 in, (9) 0.11 to 0.19 in, (4) 0.2 to 1/2 in, 1 in, 2 in, 4 in and 0.05 in Blocks

• Precision gauge blocks are the primary standards vital to dimensional quality control in the manufacture of parts
• CERA blocks, made of ceramic materials with superior surface quality, were developed by Mitutoyo's ultra-precision machining techniques and solve problems commonly associated with steel gauge blocks
• Provided with inspection certificate
• Perfect wringing is possible using the center hole - after wringing the square gauge blocks, an optional tie rod can be inserted through the center hole to fix the blocks using a screw
• A height reference standard can easily be made - a precision height reference standard can be made easily and inexpensively using accessories such as the plain jaw and block base
• A dedicated inspection jig can be easily made - a dedicated inspection jig for periodic inspection of instruments can be made easily and inexpensively
• A wide measuring surface with cross section dimensions of [24.1 x 24.1 mm/0.95 x 0.95 in] is available
• A square gauge block can retain stable orientation both longitudinally and laterally
• A wide range of application measurements can be made, including cutting tool positioning, angle measurement with a sine bar, taper measurement with a roller and inspection of depth micrometers

ASME B89.1.9-2002