3M™ REINFORCED BODY FILLER, 05877, 276 ML DMS CARTRIDGE, 6 PER CASE
3MT7000120099
MFG #: 7000120099
$38.82
/ EA
- Country of Origin: US
- Manufacturer Name: 3M
- Odor/Scent: Part A: Styrenic/Part B: Characteristic
- Temperature Rating: -20 to 180 deg F
- Viscosity: Part A: 1080000 to 1240000 cPs
- VOC Content: Part A: 257 g/L/Part B: =59 g/L
- Type: 2-Component 2-Part
- Color: Part A: Green/Part B: Blue
- Container Size: 276 mL
- Container Type: Cartridge
- Form: Paste
3M™ reinforced filler for DMS is a 2-component, resin rich filler that offers easier mixing and dispensing through the 3M™ dynamic mixing system. The system efficiently mixes the filler and hardener so that it is ready to use immediately upon being dispensed, saving automotive technicians time and effort by eliminating hand mixing. Our 3M™ reinforced filler for DMS contains milled fiberglass and is packaged in a dual cartridge system. Our reinforced filler offers excellent adhesion to steel, galvanized steel, aluminum, E-coat, sheet molded compound (SMC) and fiberglass (FRP). It provides additional strength when deeper fill and gap spanning capability are needed. This filler is ideal for weld seams, sheet molded compound repair and fiberglass repair. 3M™ reinforced filler for DMS streamlines the process of mixing filler and hardener. Instead of manually mixing filler and hardener on a board with a spreader, the 3M™ dynamic mixing system delivers a perfect ratio of hardener and filler. The filler may be applied to the vehicle straight from the dispenser with the simple touch of a trigger on the 3M™ dynamic mixing system applicator. For the typical auto body shop, this system maximizes productivity and efficiency. 3M™ reinforced filler for DMS should be used in conjunction with proper reinforcing products and repair procedures. When used properly it offers excellent sag resistance and high build and gap filling characteristics increasing repair strength and reducing application of traditional body filler.
- Application
- Item Features
- Standards
For weld seams, sheet molded compound repair and fiberglass repair
- 2-component, resin rich filler for high building, increasing repair strength
- Versatile formula adheres to most automotive substrates
- Milled fiberglass in filler adds reinforcing strength
- Dual cartridge system designed for use with the 3M™ dynamic mixing system
- System mixes hardener and filler to a perfect ratio every time
OSHA 29 CFR 1910.1200|ASTM Certified