/seco_new_150x150.jpg?width=150&height=150)
.531 13.50MM CROWNLOC PLUS INSERT FOR STEEL
.531 13.50MM CROWNLOC PLUS INSERT FOR STEEL
SEC02634581
02634581
145.00
/ EA
http://schema.org/OutOfStock
/Product/SEC02634581
- Corner Chamfer Angle: 35°
- Corner Chamfer Width: 0.005in
- Country of Origin: SE
- Cutter Diameter Inch: 0.531in
- Cutting Edge Angle: 70°
- Geometry: P
- Included Angle: 140°, 142 deg, 142°
- Manufacturer Name: Seco Tools
- Manufacturer's Grade: 4334
- Material: Carbide
- Material Grade: Carbide PVD
- Maximum Hole Diameter: 0.534in
- Minimum Hole Diameter: 0.531in
- Series: SD400
- Surface Treatment: PVD
- Tool Type: Insert
- Type: Replaceable
- Manufacturer Grade: 4334
- ANSI Designation: SD400-13.50-P
- Has Attributes: Yes
- Has Image: Yes
- ISO Designation: SD400-13.50-P
- Old Manufacturer Number: 41997
- Item Features
- Standards
- Placeable crowns to eliminate the need for and cost of regrinding, guarantees consistently higher performance and tool life while also reducing the number of drills required in inventory, Double coolant holes through the crown permit a high volume of coolant to reach the cutting edges
- The result is safer chip evacuation and longer tool life
PROP65