MASTER FLUID SOLUTIONS

1GAL JUG MACH TOOL SUMP&SYSTEM CLEANER

MSTFWHMXXT-4G MFG #: WHMXXT-4G
$45.76 / EA
1GAL JUG MACH TOOL SUMP&SYSTEM CLEANER
  • Color: Straw Yellow
  • Country of Origin: US
  • Manufacturer Name: Master Fluid Solutions
  • Odor/Scent: Slight
  • Series: Whamex XT™
  • Specific Gravity: 1.075
  • Container Size: 1 gal
  • Container Type: Jug
  • Form: Liquid
Master STAGES™ Whamex XT™ is a low foam, safe, fast-acting, concentrated formula that will save machine cleaning downtime while removing the oily residues, scums and insoluble soap deposits that reduce coolant life. Whamex XT™ is made for cleaning out machine tool sumps and larger systems, coolant supply lines and coolant recycling equipment. Whamex XT™ is compatible with most waste treatment (including ultrafiltration) and will not degrade TRIM® metalworking fluids when used as directed.
QTY
Add to List
  • Application
  • Item Features
General-purpose garden sprayer, scrub out the chips, sludge, and any other residues from all interior, exterior, tool changer areas including high-pressure sumps and filter canisters
  • A very specialized formula that draws on Master Chemical's knowledge of coolant formulation and many years of hands-on experience in machine cleanouts
  • Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach areas - getting rid of these residues is one of the best ways to extend coolant life in your system
  • Very hard water tolerant allowing it to be effective in raw water or used coolant
  • Environmental approvals are simplified because Whamex XT™ contains no nitrites, phosphates, barium, phenols, or butyl cellusolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients
  • When used as directed below, this product is compatible with TRIM® brand synthetic, semisynthetic, and soluble oil coolants, as well as most competitive coolants
  • Will remove heavy soils from machines without affecting paints, coatings, seals, hoses, or skirting, and it wont leave a slippery residue
  • Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways
  • PREFERRED METHOD FOR CLEANING MACHINE TOOLS AND CENTRAL SYSTEMS: Add 1%-3% Whamex XT™ into the machine sump and run machine as normal for at least 24 hours or more for best results, if the machine runs high pressure through-the-tool for significant amounts of time, the cleaner may cause some foam, keep a defoamer, such as Master STAGES™ DF1 or TRIM® TC 239, available during this process
  • After the Whamex XT™ has circulated for at least 24 hours, pump out the sump and remove all chips, sludge, residue and swarf. Remember to clean out overflow areas and flumes
  • Spray down the machine with a 10%-15% Whamex XT™ and water solution using
  • 10 at 2% Working Solution, 10.5 at 5% Working Solution pH range
  • >200 deg F flash point
  • 12 Months shelf life