3M 250ML WHT PS67 PIPE SEALANT

3M�� Scotch-Weld�� stainless steel high temperature pipe sealant PS67 is an off-white, fast curing, paste pipe sealant. Offering high temperature resistance up to 400 deg F (204 deg C), this sealant provides a strong, tough seal that can be easily disassembled. We also formulated this high temperature pipe sealant to resist pressure and vibration for long lasting durability. 3M�� Scotch-Weld�� stainless steel high temperature pipe sealant PS67 is a 1-component, anaerobic sealant that cures and seals hydraulic and pneumatic pipes and fittings. This general purpose, paste pipe sealant is fast curing, sealing almost instantly and withstands high temperatures and pressure. We also designed this sealant for disassembly, creating a strong, tough seal that can be later disassembled with ease. This sealant is formulated to resist pressure and vibration as well as lock and seal medium to coarse straight and tapered threads. 3M�� Scotch-Weld�� stainless steel high temperature pipe sealant PS67 works on inactive surfaces (such as stainless steel) and provides an almost instant low pressure seal. A high pressure seal results when the bond is fully cured. It seals quickly to stop leaks when applied to threads or compression fittings of most metal and certain plastic pipes, without shredding, evaporation or shrinkage. In addition, this sealant prevents galling as well as helps eliminate the waste and mess of leaking hydraulic fluids, oil, fuel and lubricants. Offering a rapid seal that withstands heat, pressure and vibration, 3M�� Scotch-Weld�� stainless steel high temperature pipe sealant PS67 is an excellent solution for fast results. Resilient and durable, this pipe sealant is formulated to produce the strong seal necessary for a wide variety of demanding applications. Anaerobic adhesives are uniquely formulated to cure in the absence of oxygen. The term "anaerobic" means "living without air" and when the oxygen is excluded, a chemical chain reaction begins that causes the adhesive to polymerize. Contact with metal speeds the polymerization process and rapidly accelerates the curing process, forming tough cross linked plastic that provides aggressive adhesion with effective shear strength. More commonly referred to as thread lockers, pipe sealants, retaining compounds and gasket makers, these adhesives are often used to enhance the seal or holding force, in the threads of joined fastener systems such as nut-and-bolt assemblies. A nut-and-bolt assembly may have as little as 15% metal-to-metal contact and even a small amount of anaerobic adhesive readily fills any air voids between the threads and then hardens to a thermoset plastic. These unique adhesives are easy-to-dispense, cure rapidly and provide effective torque strength while resisting temperature and vibration and sealing out moisture and gasses to protect against corrosion. Anaerobic adhesives can decrease manufacturing costs, enhance equipment reliability, minimize aftermarket breakdown and reduce warranty claims.