15IN 230/460V VARIABLE SPEED DRILL PRESS
WHM354551
MFG #: 354551
$3,071.43
/ EA
- Amperage Rating: 6.2/3.1 A
- Base Dimensions: 20-7/16 x 14-3/16 in
- Chuck Size: 1/2 in
- Column Diameter: 3 in
- Dimensions: 30 in L x 20 in W x 71 in H
- Horsepower: 1 hp
- Spindle Speed: 400 to 5000 rpm
- Spindle Taper: MT-2
- Spindle to Column Distance: 7-1/2 in
- Spindle to Table Distance: 25-3/4 in
- Spindle Travel: 6 in
- Swing: 15 in
- Table Load Capacity: 90 lb
- Table Size: 15 x 18 in
- Table Tilt: 45 deg Right/Left
- Type: Spline Drive
- Voltage Rating: 230/460 VAC
These JET drill presses use a variable speed motor with the stepped-pulley system and come equipped with a continuously variable transmission. This enables use at a wide range of speeds, as well as the ability to change speed during operation. A scale-marked hand wheel that matches the desired machine speed is mounted to a reduction gearing system for precise operator control. This adjusts the gearing ratio between the motor's fixed pulley and the output shaft's variable pulley, changing the speed of the chuck. A tensioner pulley is implemented in the belt transmission to take up or release the slack in the belt as the speed changes.
- Includes
- Item Features
LED Readout
- Full bearing support on quill for maximum spindle stiffness
- Hand wheel speed adjustment of 400 to 5000 rpm
- Large 2-1/4 in quill for greater accuracy
- 3 in column diameter for maximum head support
- 6 in stroke for deep hole application
- Accurate depth stop for precise hole depths
- 1/2 in drill chuck and arbor included
- Safety collar
- Variable speed