686M-3Z EXTERNAL CHAMFER GAGES

STR65002 MFG #: 65002
$1,181.46 / EA
  • Dial Color: Yellow
  • Material: Hardened Tool Steel
  • Measuring Range: 25 to 50 mm
  • Plunger Type: 3-Blade
  • Series: 686
  • Type: External
These gages directly measure the diameter of chamfered holes. No setting master is necessary. When the three blade plunger is pressed against a fl at surface, the gage should read the set number stamped on the back of the indicator. In case of wear, the gage may be adjusted to read the proper number. 25 - 50 mm range in case of wear, the gage may be adjusted to read the proper number.
QTY
  • Item Features
  • Standards
  • When the three blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator
  • No setting master is necessary
  • Gages will measure the smallest diameter of any chamfer within the range of angles printed on the dial face of the gage
  • Gages are also available with electronic indicators on request
  • Deluxe padded case
  • All ground surfaces are of hardened tool steel
  • Indicators are AGD design
  • Gages directly measure the diameter of chamfered holes
  • For 90 - 127 deg Dial reading
PROP65: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm