2.5T MSFP5 MAINT SET

(1) P142 Hydraulic Hand Pump, (1) HC7206 6 ft Thermoplastic High Pressure Hydraulic Hose, (1) RC55 General Purpose Hydraulic Cylinder, (1) G2535L Hydraulic Pressure Gauge, (1) GA3 Gauge Adapter, (1) FZ1055 High Pressure Fitting Adapter, (1) A23 Threaded Adapter, (1) A25 Base Attachment, (1) A1034 Collar Toe, (1) MZ4010 RC Flat Base Cylinder Attachments, (1) A545 Threaded Connector, (1) A530 Threaded Plunger Toe, (1) A531 Serrated Saddle, (1) A532 90 deg V-Base, (1) A629 Wedge Head, (1) A539 Rubber Flex Head, (1) WR5 Spreader, (1) MZ4013 Lock Pin, (1) MZ4007 Lock-On Connector, (1) MZ4009 Female Lock-On Adapter, (1) MZ4002 3 in Extension Tube, (1) MZ4003 5 in Extension Tube, (1) MZ4004 10 in Extension Tube, (1) MZ4005 18 in Extension Tube, (1) MZ4006 23 in Extension Tube and (1) CM6 Industrial Storage Case

• Enerpac® maintenance sets are a complete assortment of accessories matched to hydraulic powered tools
• Using these sets allows you to quickly configure a unique tool to meet your most difficult jobs
• Built around the Enerpac® lightweight hand pump, hose and cylinder, these sets enable you to push, pull, lift, press, straighten, spread and clamp
• Lock-on or threaded connectors
• Complete set for almost every maintenance application
• When cylinders are used with maintenance set attachments or components, the maximum system pressure must be limited to half the rated pressure (5000 psi)
• If no attachments are being used, capacity is double these values, maximum operating pressure is then 10000 psi
• Only use attachments provided with set
• Non-Enerpac® attachments and longer extension tubes will reduce column strength, potentially creating unsafe conditions

ETC Certified

Limited