516-46632PCS/SET, MM, SQUARE, JIS/DIN/ISO

Calibration and Inspection Applications

(9) 1.01 to 1.09 mm, (9) 1.1 to 1.9 mm, (9) 1 to 9 mm, (3) 10 to 30 mm, 1.005 mm and 60 mm Blocks

• Precision gauge blocks are the primary standards vital to dimensional quality control in the manufacture of parts
• These higher accuracy gauges are intended for use within a controlled environment by skilled inspection staff
• Mainly used as reference standards for setting high-precision measuring equipment and for the calibration of lower grade gauge blocks
• Perfect wringing is possible using the center hole - after wringing the square gauge blocks, an optional tie rod can be inserted through the center hole to fix the blocks using a screw
• A height reference standard can easily be made - a precision height reference standard can be made easily and inexpensively using accessories such as the plain jaw and block base
• A dedicated inspection jig can be easily made - a dedicated inspection jig for periodic inspection of instruments can be made easily and inexpensively
• A wide measuring surface with cross section dimensions of [24.1 x 24.1 mm/0.95 x 0.95 in] is available
• A square gauge block can retain stable orientation both longitudinally and laterally
• A wide range of application measurements can be made, including cutting tool positioning, angle measurement with a sine bar, taper measurement with a roller and inspection of depth micrometers