L.S. STARRETT

684M-1Z INTERNAL CHAMFER GAGES

STR64993 MFG #: 64993
$673.18 / EA
  • Dial Color: Yellow
  • Dial Size: 2-9/32 in Dia
  • Graduations: 0.02 mm
  • Material: Hardened Tool Steel
  • Measuring Range: 0 to 9.5 mm
  • Plunger Type: 3-Blade
  • Series: 684
  • Type: Internal
These gages directly measure the diameter of chamfered holes. No setting master is necessary. When the three blade plunger is pressed against a fl at surface, the gage should read the set number stamped on the back of the indicator. In case of wear, the gage may be adjusted to read the proper number. 0 - 9.5 mm range in case of wear, the gage may be adjusted to read the proper number.
QTY
  • Item Features
  • Standards
  • When the three blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator
  • No setting master is necessary
  • Gages will measure the smallest diameter of any chamfer within the range of angles printed on the dial face of the gage
  • Gages are also available with electronic indicators on request
  • Deluxe padded case
  • All ground surfaces are of hardened tool steel
  • Indicators are AGD design
  • Gages directly measure the diameter of chamfered holes
  • For 90 - 127 deg Dial reading
PROP65: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm