L.S. STARRETT

684-1Z INTERNAL CHAMFER GAGES

STR63688 MFG #: 63688
$657.66 / EA
  • Dial Color: White
  • Dial Size: 2-9/32 in Dia
  • Graduations: 0.001 in
  • Material: Hardened Tool Steel
  • Measuring Range: 0 to 3/8 in
  • Plunger Type: 3-Blade
  • Series: 684
  • Type: Internal
These gages directly measure the diameter of chamfered holes. No setting master is necessary. When the three blade plunger is pressed against a fl at surface, the gage should read the set number stamped on the back of the indicator. In case of wear, the gage may be adjusted to read the proper number. 0 - 3/8 in range in case of wear, the gage may be adjusted to read the proper number.
QTY
  • Item Features
  • Standards
  • When the three blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator
  • No setting master is necessary
  • Internal gages will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the dial face
  • Gages are also available with electronic indicators on request
  • Deluxe padded case
  • All ground surfaces are of hardened tool steel
  • Indicators are AGD design
  • Gages directly measure the diameter of chamfered holes
  • For 90 - 127 deg Dial reading
PROP65: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm