1611 KLEENSCRIBE LAYOUT DYE N

For laying out dies, cams, templates, jigs, fixtures, patterns, castings and checking alignment and wearing parts

• Unaffected by cutting lubricants and heat generated during machining
• Specially prepared for brushing or spraying onto clean, dry metal surfaces
• Brush or spray an opaque blue background that makes scribed lines stand out sharp and clear
• Apply with handy brush in the cap on the small plastic bottle, or shake the aerosol can thoroughly and spray a thin, even coating at a distance of about 12 in (300mm) from the working surface, keeping the can in motion
• To remove Kleenscribe, use a rag or wiper, moistened with denatured alcohol
• Petroleum gases, liquefied, sweetened, n-butyl acetate, methanol, ethyl acetae, Nitrocellulose, colloided, granular, propan-2-ol, toluene, Solvent naphtha (petroleum), light aliph, acetone composition
• Characteristic odor

OSHA 29 CFR 1910.1200|PROP65: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm