3011 RETRACTABLE TOOL LANYARD

The Squids® 3011 Retractable Tool Lanyard is a lightweight and extremely durable tethering solution designed to mount to a D-ring user's belt or a separate anchor point. Using a retractable lanyard limits potential snag hazards compared to standard lanyards. This lanyard can tether tools weighing 0.5 lb/0.23 kg in a retracted state and prevents tools weighing 8 lb/3.6 kg from falling on people or objects below when working at-heights. The retractable tethering cord is made of high-strength, cut-resistant Dyneema® with a protective sleeve over the exposed cord to reduce wear and tear for a longer life. The durable ABS plastic housing is textured for better grip and is designed to protect the internal workings of the retractable. Featuring a tapered cord exit to limit the debris being retracted back into the housing with the cord. Even with its incredible durability this heavy-duty retractable lanyard weighs less than 0.5 lb/0.23 kg and measures 48 in/122 cm when fully extended. How to Use - The anchoring end of the retractable features a swiveling carabiner connection for anchoring to d-rings or other locations. The connecting end of the cord has a patented Squids® double-action carabiner to secure to a hand tool weighing up to 8 lb/3.6 kg. A trigger switch allows you to set your working length and keep the lanyard at a fixed length, so you don't feel a constant tension on your tool while getting the job done. To lock the cord in place, simply flip the trigger switch at the desired cord length. To retract, either flip the switch back or pull the lanyard out a bit further to release the lock allowing the cord to retract again. Tested and Approved - Tested and qualified to the ANSI/ISEA 121 standard, these retractable tool lanyards have no equal. The tethering cord is designed to expose a red length of cord that serves as an impact indicator if the lanyard sees a force of 110 lb/50 kg or greater, letting you know if a drop has occurred. All tool lanyards are built to withstand defined weight limits and are easy to use by any worker to avoid accidentally dropped objects that could cause unwanted damage, injuries, or possibly death. Safety lanyards are a part of an overall fall protection plan to reduce the risk of falling objects and increase workplace safety. When working at-heights it's critical to tether tools.