/3m%20logo_150x150_72dpi.jpg)
3M™ SAFETY-WALK™ SLIP-RESISTANT CONFORMABLE TAPES & TREADS 530, SAFETY YELLOW, 6 IN X 60 FT, ROLL, 1/CASE
3MS7100004066
MFG #: 7100004066
$229.49
/ CS
- Country of Origin: US
- Manufacturer Name: 3M
- Material: Aluminum Foil Substrate, Aluminum/Mineral
- Surface Pattern: Mineral Coated, Solid
- Surface Type: Contoured/Irregular, High Friction/Slip-Resistant
- Thickness: 0.036 in
- Type: Conformable Heavy Duty
- Series: 500
- Width: 6 in
- Length: 60 ft, 60 ft/Roll
3M™ Safety-Walk™ slip resistant tapes and treads series 500 has been certified by the National floor safety Institute (NFSI) as providing high-traction. A wet static coefficient of friction (SCOF) of greater than 0.6 was chosen by NFSI as the criteria for high-traction because according to NFSI, floor surfaces maintaining this level of slip resistance when wet have proven to reduce slip-and-fall claims by between 50% and 90%.
- Application
- Item Features
- Standards
Irregular Surfaces Like Diamond Plating or Flat Surfaces with Rivets or Screw Heads, Ladders, Loading Ramps, Platforms and Stairs Applications
- Aluminum backing conforms to corners, curves and irregular surfaces like diamond plating, riveted plates and ladder rungs
- Abrasive particles bonded by a polymer coating provide traction and enhance safety
- Aggressive, high performance adhesive forms an excellent bond for a secure hold
- Tapes and treads resist wrinkling, curling, tearing, shrinking and lifting
- Safety yellow color for high visibility and easy identification of hazard areas
- Ideal for use on diamond grade safety plates, steps and other irregular surfaces
- Mineral coated, slip-resistant with aluminum foil backing
- High friction, slip-resistant material has a special aluminum backing that conforms around corners and adheres to irregular surfaces
- For irregular or contoured surfaces in light to heavy shoe traffic areas
- The reverse side is coated with a pressure sensitive adhesive covered by a removable protective liner
- Single sided adhesive
- 40 to 175 deg F operating
- Pass fire retardancy
ANSI/NFSI B101.1/B101.3|US MIL-PRF-24667C