3/4IN LONG NUT

For use with copper, brass, aluminum, welded steel hydraulic tubing that can be flared, manufactured especially for hard-to-hold liquids and gases

• Economical fitting resists mechanical pullout
• Easy to disassemble and may be reassembled repeatedly, for a leak-proof connection
• Cut tubing squarely and clean tube end thoroughly to remove burrs
• Place nut onto tube
• Place threaded end of nut toward end of tube
• Flare tube end with flaring tool to provide 45 deg flare
• Clamp tube flare between nut and nose of fitting body by screwing nut on finger-tight
• Tighten with a wrench an additional 1/4 turn for metal-to-metal seal

CA 360/CA 345/CA 377 Brass|SAE 010110|Listed with Underwriter's Laboratories for Flammable Liquid, Marine, Refrigeration and Gas Applications|Meets functional requirements of SAE J512 and J513, ASA and MS (Military Standards)|PROP65: Cancer and Reproductive Harm - www.P65Warnings.ca.gov