1 1/4 BOSS CLAMP
DIXB19
MFG #: B19
$29.39
/ EA
- Domestic/Import: Domestic
- Series: Boss™
- Torque Rating: 40 ft-lb
- Width: 3-3/4 in
- Nominal Size: 2-8/64 to 2-24/64 in Hose
- Length: 4 in
- Band Material: Iron
- Surface Treatment: Zinc Plated
- Item Features
- 4-bolt type clamp with 2 gripping fingers and 2 clamp sections
- Bolts in Boss™ clamps are designed to bend as they are tightened, this allows the clamp to conform to the hose outside diameter
- Always tighten bolts to their specified torque value
- Periodic re-tightening of bolts is required due to "cold flow" phenomenon present in all rubber hoses
- The bolts used in the boss interlocking clamps are not standard bolts
- They vary from standard bolts in their length, diameter, overall thread length and material hardness
- These bolts can be retorqued, but it is not recommended that the bolts or clamps be reused, as they are designed for a single bend only
- Torque values for clamps are based on dry bolts, the use of lubricant on bolts will adversely effect clamp performance
- Worn-out hose couplings can be dangerous
- They should be checked regularly and replace when necessary
- Each coupling user should review applications and add safety devices where indicated
- Note: pressurized steam is an extremely dangerous commodity
- Only hose, fittings, clamps and accessory items that have been approved for steam service should ever be used! never use an unapproved item for steam service
- Always follow the manufacturer's product recommendations for pressurized steam handling
- Warning: this product contains a chemical known to the State of California to cause birth defects or other reproductive harm
- Do not use in connection with drinking water
- Wash hands after handling
- http://www.youtube.com/watch?v=wYrt27WXkqY&feature=share&list=PL10BD55ADAF82DEDA&index=9