1 3/8IN FERRULE FOR 520-H SERIES

Intended for fuel delivery service. Commonly used in the transfer of fuel to homes, airplanes, ships, etc | Recommended for discharge and suction service

• For use with brass internally expanded permanent couplings
• H520 fittings are design for internal expansion only
• Do not interchange with other manufacturer's fittings
• Designed for internal expansion only
• Dixon® holedall stems and ferrules are specifically designed to be used together as a coupling system
• Do not use a wrench or vice on ferrule
• Holedall couplings, regardless of coupling style, are never to be used for steam service at any pressure
• Holedall fittings are not to be used with cable reinforced high pressure hose, 4 or 6 braid wire hydraulic hose or any other service not listed in the recommendations
• Strict adherences to ferrule OD range (Internally Expanded) for each hose end to be assembled is essential for satisfactory performance
• Hose service working pressure (including surges and spikes) is never to exceed the maximum recommended working pressure for the fitting
• The assembly's (hose + coupling) maximum working pressure is the lesser of the hose rated working pressure or the coupling rated working pressure
• Media being transported through the hose should be compatible with the stem material
• Compatibility of ferrule material with the environment in which it will be used is recommended
• For applications other than the ones list, please consult Dixon®

PROP65: This product contains a chemical known to the state of California to cause birth defects or other reproductive harm