DIXON VALVE & COUPLING

1 1/2 HFTDALL II FERR FOR ROYALFLEX

DIXFW24 MFG #: FW24
$42.53 / EA
1 1/2 HFTDALL II FERR FOR ROYALFLEX
  • Country of Origin: US
  • Domestic/Import: Domestic
  • End Style: Hose
  • Manufacturer Name: Dixon Valve & Coupling
  • Material: Carbon Steel
  • Nominal Size: 1-1/2 in ID x 1-58/64 to 2-2/64 in OD
  • Series: Holedall™ II
QTY
Add to List
  • Item Features
  • Recommended for use with Royal-Flex™ thin wall hose 1193 and 1196 or hoses with similar construction, having helical wire for a given OD range
  • These specially designed carbon steel ferrules have serrations on the outside and should be used with external swage stem styles TM, TP and TG
  • The coupling system requires no bolts and results in a clean coupling with no protrusions
  • The holedall coupling provides long lasting efficiency and safety
  • Dixon®holedall stems and ferrules are specifically designed to be used together as a coupling system
  • Due to differences in dimensions and tolerances, for safety reasons, do not use other manufacturer's stems or ferrules with Dixon®holedall products
  • Do not use a wrench or vice on ferrule
  • Holedall couplings, regardless of coupling style, are never to be used for steam service at any pressure
  • Holedall fittings are not to be used with cable reinforced high pressure hose, 4 or 6 braid wire hydraulic hose or any other service not listed in the recommendations
  • Externally swaged holedall couplings, to perform satisfactorily, must be applied properly in accordance with Dixon®s assembly procedures, using correct die and ferrule for that particular hose end OD
  • Dixon®s die and ferrule recommendation guide is to be used to select correct dies and ferrules
  • Hose service working pressure (including surges and spikes) is never to exceed the maximum recommended working pressure for the fitting
  • The assembly's (hose + coupling) maximum working pressure is the lesser of the hose rated working pressure or the coupling rated working pressure
  • Media being transported through the hose should be compatible with the stem material
  • Compatibility of ferrule material with the environment in which it will be used is recommended
  • Do not use in connection with drinking water
  • Wash hands after handling