/harvey%20tool%20logo_150x150_72dpi_new.jpg)
.125Dx45DEG BACK DEBURRING MILL MD RCH
.125Dx45DEG BACK DEBURRING MILL MD RCH
HATL846425
846425
61.20
/ EA
http://schema.org/OutOfStock
/Product/HATL846425
- Chamfer Width: 0.0111 in
- Country of Origin: US
- Cutter Head Diameter: 0.125 in
- Cutting Direction: Right Hand
- End Style: Chamfer Threaded
- Flat Width: 0.0600 in
- Manufacturer Name: Harvey Tool
- Material: Solid Carbide
- Overall Length: 2 in, 2in
- Shank Diameter: 0.125in, 1/8 in
- Shank Type: Cylindrical
- Head Diameter: 0.125in
- Length of Cut: 0.0111in
- Included Angle: 90, 90 deg
- Number of Flutes: 6
- Angle Per Side: 45
- Chamfer Center Diameter: 0.1149in
- Chamfer Center Length: 0.0655in
- End Length: 0.06in
- Neck Diameter: 0.097in
- Neck Length: 0.375in
- Surface Treatment: Un
- Application
- Item Features
- Standards
Deburring on backside of small holes and tight pockets
- Slightly undersized to fit in common hole sizes
- Design has smaller radial projection than double angle shank cutters and back chamfer cutters, which results in increased neck diameter and improved strength
- Left hand shear flute / right hand cut evacuates chip away from part
- Applicable Materials are Aluminum, Cast Iron, Steel, Stainless Steel, Wood, Composites
- Axial Length Of Cut 0.0111 in
- Neck Diameter 0.0970 in
- Neck Length 0.3750 in (3/8)
- Chamfer Center Length 0.0655 in
- Chamfer Center Diameter 0.1149 in
- Profile Back Chamfer
PROP65: This product contains chemicals known to the State of California to cause cancer