.210" 6FL 90DEG BACK DEBURRING END MILL

.210" 6FL 90DEG BACK DEBURRING END MILL

HATL57140-C3 57140-C3
75.80 / EA
http://schema.org/OutOfStock
.210 x45Deg BACK DEBURR AlTiN
  • Chamfer Width: 0.0191 in
  • Country of Origin: US
  • Cutter Head Diameter: 0.21 in
  • Cutting Direction: Right Hand
  • End Style: Chamfer Threaded
  • Flat Width: 0.0600 in
  • Manufacturer Name: Harvey Tool
  • Material: Solid Carbide
  • Overall Length: 3 in, 3in
  • Shank Diameter: 0.25in, 1/4 in
  • Shank Type: Cylindrical
  • Head Diameter: 0.21in
  • Length of Cut: 0.0191in
  • Included Angle: 90 deg, 90°
  • Number of Flutes: 6
  • Angle Per Side: 45°
  • Chamfer Center Diameter: 0.1919in
  • Chamfer Center Length: 0.0695in
  • End Length: 0.06in
  • Neck Diameter: 0.166in
  • Neck Length: 1.75in
  • Surface Treatment: C3
QTY
Add to List
  • Application
  • Item Features
  • Standards
Deburring on backside of small holes and tight pockets
  • Slightly undersized to fit in common hole sizes
  • Design has smaller radial projection than double angle shank cutters and back chamfer cutters, which results in increased neck diameter and improved strength
  • Left hand shear flute / right hand cut evacuates chip away from part
  • Applicable Materials are Non-Ferrous Metal, Cast Iron, Steel, Stainless Steel, Composites
  • Axial Length Of Cut 0.0191 in
  • Neck Diameter 0.1660 in
  • Neck Length 1.7500 in (1-3/4)
  • Chamfer Center Length 0.0695 in
  • Chamfer Center Diameter 0.1919 in
  • Profile Back Chamfer
PROP65: This product contains chemicals known to the State of California to cause cancer