Harvey Tool brand logo

.040" 4FL 45DEG CARBIDE BACK DUBURRING MILL

HATL65740-C3 MFG #: 65740-C3
$73.20 / EA
.040" DIA x 45DEG BACK DEBURRING CUTTER
  • Chamfer Width: 0.0048 in
  • Country of Origin: US
  • Cutter Head Diameter: 0.04 in
  • Cutting Direction: Right Hand
  • End Style: Chamfer Threaded
  • Flat Width: 0.0300 in
  • Manufacturer Name: Harvey Tool
  • Material: Solid Carbide
  • Overall Length: 2 in, 2in
  • Shank Diameter: 0.125in, 1/8 in, 1/8in
  • Shank Type: Cylindrical
  • Head Diameter: 0.04in
  • Length of Cut: 0.0048in
  • Included Angle: 90, 90 deg, 90°
  • Number of Flutes: 4
  • Angle Per Side: 45, 45°
  • Attributes (Y): Y
  • Chamfer Center Diameter: 0.0362in
  • Chamfer Center Length: 0.0324in
  • End Length: 0.0300in, 0.03in
  • Image (Y): Y
  • Neck Diameter: 0.028in
  • Neck Length: 0.187in, 3/16in
  • Surface Treatment: AlTiN, C3
  • System of Measurement: Imperial
QTY
Add to List
  • Application
  • Item Features
  • Standards
Deburring on backside of small holes and tight pockets
  • Slightly undersized to fit in common hole sizes
  • Design has smaller radial projection than double angle shank cutters and back chamfer cutters, which results in increased neck diameter and improved strength
  • Left hand shear flute / right hand cut evacuates chip away from part
  • Applicable Materials are Non-Ferrous Metal, Cast Iron, Steel, Stainless Steel, Composites
  • Axial Length Of Cut 0.0048 in
  • Neck Diameter 0.0280 in (0.7 mm)
  • Neck Length 0.1870 in (3/16)
  • Chamfer Center Diameter 0.0362 in
PROP65: This product contains chemicals known to the State of California to cause cancer