/harvey%20tool%20logo_150x150_72dpi_new.jpg)
.165" 6FL 90DEG BACK DEBURRING END MILL
HATL57130
MFG #: 57130
$63.00
/ EA
- Chamfer Width: 0.0191 in
- Country of Origin: US
- Cutter Head Diameter: 0.165 in
- Cutting Direction: Right Hand
- End Style: Chamfer Threaded
- Flat Width: 0.0600 in
- Manufacturer Name: Harvey Tool
- Material: Solid Carbide
- Overall Length: 2.5in, 2-1/2 in, 2-1/2in
- Shank Diameter: 0.1875in, 3/16 in, 3/16in
- Shank Type: Cylindrical
- Head Diameter: 0.165in
- Length of Cut: 0.0191in
- Included Angle: 90, 90 deg, 90°
- Number of Flutes: 6
- Angle Per Side: 45, 45°
- Attributes (Y): Y
- Chamfer Center Diameter: 0.1469in
- Chamfer Center Length: 0.0695in
- End Length: 0.0600in, 0.06in
- Image (Y): Y
- Neck Diameter: 0.121in
- Neck Length: 1.375in, 1-3/8in
- Surface Treatment: Un, Uncoated
- System of Measurement: Imperial
- Application
- Item Features
- Standards
Deburring on backside of small holes and tight pockets
- Slightly undersized to fit in common hole sizes
- Design has smaller radial projection than double angle shank cutters and back chamfer cutters, which results in increased neck diameter and improved strength
- Left hand shear flute / right hand cut evacuates chip away from part
- Applicable Materials are Aluminum, Cast Iron, Steel, Stainless Steel, Wood, Composites
- Axial Length Of Cut 0.0191 in
- Neck Length 1.3750 in (1-3/8)
- Chamfer Center Length 0.0695 in
PROP65: This product contains chemicals known to the State of California to cause cancer