/harvey%20tool%20logo_150x150_72dpi_new.jpg)
.055" 4FL 90DEG BACK DEBURRING END MILL
HATL57055
MFG #: 57055
$67.70
/ EA
- Chamfer Width: 0.0045 in
- Country of Origin: US
- Cutter Head Diameter: 0.055 in
- Cutting Direction: Right Hand
- End Style: Chamfer Threaded
- Flat Width: 0.0400 in
- Manufacturer Name: Harvey Tool
- Material: Solid Carbide
- Overall Length: 2 in, 2in
- Shank Diameter: 0.125in, 1/8 in, 1/8in
- Shank Type: Cylindrical
- Head Diameter: 0.055in
- Length of Cut: 0.0045in
- Included Angle: 90, 90 deg, 90°
- Number of Flutes: 4
- Angle Per Side: 45, 45°
- Attributes (Y): Y
- Chamfer Center Diameter: 0.0515in
- Chamfer Center Length: 0.0423in
- End Length: 0.0400in, 0.04in
- Image (Y): Y
- Neck Diameter: 0.043in
- Neck Length: 0.437in, 7/16in
- Surface Treatment: Un, Uncoated
- System of Measurement: Imperial
- Application
- Item Features
- Standards
Deburring on backside of small holes and tight pockets
- Slightly undersized to fit in common hole sizes
- Design has smaller radial projection than double angle shank cutters and back chamfer cutters, which results in increased neck diameter and improved strength
- Left hand shear flute / right hand cut evacuates chip away from part
- Applicable Materials are Aluminum, Cast Iron, Steel, Stainless Steel, Wood, Composites
- Axial Length Of Cut 0.0045 in
- Neck Diameter 0.0430 in (1.1 mm)
- Neck Length 0.4370 in (7/16)
- Chamfer Center Length 0.0423 in
PROP65: This product contains chemicals known to the State of California to cause cancer