3M™ CLOTH BELT 461F, P180 XF-WEIGHT, 6 IN X 131 IN, SINE-LOK, SINGLE-FLEX, 20 EA/CASE
3MA7010360649
MFG #: 7010360649
$50.86
/ EA
- Abrasive Material: Silicon Carbide
- Applicable Materials: Glass, Stainless Steel and Titanium
- Backing Material: Polyester
- Backing Weight: XF-Weight
- Coat Type: Closed
- Country of Origin: US
- Manufacturer Name: 3M
- Type: Portable
- Wet/Dry Operation: Wet/Dry
- Belt Width: 6 in
- Belt Length: 131 in
- Grade: Very Fine
- Grit: P180
- Color: Black
3M™ cloth belt 461F is constructed of sharp silicon carbide abrasive that fractures easily and consistently produces an excellent finish for the duration of the belt life. This resin bonded cloth belt gives you flexibility, durability, and consistent performance for grinding, blending, deburring and finishing on all metals. 3M™ cloth belt 461F is frequently used for coarse grade grinding on stainless steel and titanium, as well as for glass polishing. The heavy polyester cloth backing provides rugged durability and tear resistance and is suitable for wet or dry applications. Belts come in both YF-weight polyester and XF-weight polyester. Silicon carbide is a very hard and sharp mineral commonly used for low pressure applications such as paint prep and the final stages of whitewood sanding, as well as grinding applications on metal. It can also be used for glass and mirror grinding, finishing and polishing. While it may have a shorter life than aluminum oxide, it produces a superior finish and should be used where the best possible finish is desired. Abrasive belts come in many different widths and lengths and are used on a variety of different belt sanding tools for many different applications on both wood and metal. At 3M™ we offer a broad selection of belts to fit most any industrial belt sander. Wider belts are used with wide belt sanders to dimension or finish wood panels, smooth rough cut edges of metal sheets, or add a grain pattern to stainless steel sheets. Medium width belts fit onto edge sanders for sanding flat, narrow surfaces such as panel edges; and narrow belts are used with portable belt sanders for sanding or blending wood pieces such as cabinet doors.
- Application
- Item Features
- Standards
Blending, Deburring, Finishing and Grinding
- Sharp silicon carbide mineral cuts faster than aluminum oxide and produces a consistent finish
- Tough, water-resistant polyester backing supports wet or dry applications from heavy duty grinding to fine finishing without tearing or nicking
- Cloth backing provides flexibility
- Heat-resistant resin coating bonds abrasive to backing for durability under pressure, heat and water
- Use on backstands for grinding and finishing applications
OSHA 29 CFR 1910.1200